Configuring The Access Point For Wireless Network Management - Cisco 1941W Configuration Manual

Cisco 3900 series, cisco 2900 series, cisco 1900 series
Hide thumbs Also See for 1941W:
Table of Contents

Advertisement

Configuring the Access Point for Wireless Network Management

Command
Step 6
show running-config
Step 7
copy running-config startup-config
Configuring the Access Point for Wireless Network
Management
You can enable the wireless device for wireless network management. The wireless network manager
(WNM) manages the devices on your wireless LAN.
Enter the following command to configure the wireless device to interact with the WNM:
AP(config)# wlccp wnm ip address ip-address
Enter the following command to check the authentication status between the WDS access point and the
WNM:
AP# show wlccp wnm status
Possible statuses are not authenticated, authentication in progress, authentication fail, authenticated,
and security keys setup.
Configuring the Access Point for Local Authentication and
Authorization
You can configure AAA to operate without a server by configuring the wireless device to implement
AAA in local mode. The wireless device then handles authentication and authorization. No accounting
is available in this configuration.
You can configure the wireless device as a local authenticator for 802.1x-enabled client devices to
Note
provide a backup for your main server or to provide authentication service on a network without a
RADIUS server. See Using the Access Point as a Local Authenticator at Cisco.com for detailed
instructions on configuring the wireless device as a local authenticator:
http://www.cisco.com/en/US/docs/routers/access/wireless/software/guide/SecurityLocalAuthent.html.
To configure the wireless device for local AAA, follow these steps, beginning in privileged EXEC mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
328
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
configure terminal
aaa new-model
aaa authentication login default local
aaa authorization exec local
aaa authorization network local
username name [privilege level] {password encryption-type password}
end
Chapter
Administering the Wireless Device

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

194129012911295139252921 ... Show all

Table of Contents