Electrical Connections - King Industrial KC-120FX Instruction Manual

ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN
SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE MACHINE DISCONNECTED FROM THE POWER
SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY!
KC-120FX POWER SUPPLY (220V-1 PHASE)
WARNING: YOUR KC-120FX (220V) MUST BE CONNECTED TO A
220V, 20-AMP, BRANCH CIRCUIT. FAILURE TO CONNECT IN THIS
WAY CAN RESULT IN INJURY FROM SHOCK OR FIRE.
220V OPERATION
As received from the factory, your 12" Jointer is wired for 220V
operation. This 12" Jointer is intended for use on a circuit that has an
outlet and a plug which looks like the one illustrated in Fig.1.
KC-120FX-5 POWER SUPPLY (550V- 3 PHASE)
WARNING: YOUR KC-120FX-5 (550V) MUST BE CONNECTED TO
A 550V CIRCUIT. FAILURE TO CONNECT IN THIS WAY CAN
RESULT IN INJURY FROM SHOCK OR FIRE.
550V OPERATION
As received from the factory, your 12" Jointer is wired for 550V
operation. There is no 550V plug supplied with this Jointer, a 550V
CSA approved plug will need to be purshased, therefore we
recommend contacting an authorized service center or qualified
electrician to install the plug in order to comply with all local and
national codes.
GENERAL INFORMATION
These Jointers must be grounded. If one should malfunction or
breakdown, grounding provides a path of least resistance for electric
current, to reduce the risk of electric shock. These Jointers are
equipped with a cord having an equipment-grounding conductor and
grounding plug (grounding plug-220V only). The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.

ELECTRICAL CONNECTIONS

WARNING!
PROPERLY GROUNDED OUTLET
CURRENT CARRYING PRONGS
GROUNDING PRONG
FIGURE 1