Time Switch Program 2; Preselection Of Weekday For Time Switch Program 2 - Siemens RVA63.242 User Manual

Benefits
Description
Description
Setting
Important
Effect
Example:
Siemens Building Technologies
Landis & Staefa Division

Time switch program 2

The heating system operates only if there is demand for heat.
The user can set the heating periods to suit his lifestyle.
Energy can be saved by making adequate use of the heating program.
The time switch program consists of the switching times to be entered for the weekdays
or the 7-day block. The controller has 3 time switch programs that function
independently of one another.
Time switch program 2 is always used with heating circuit 2 or the d.h.w. circulating
pump.
3.12 Preselection of weekday for time switch
program 2
This is a preselection of the weekdays or the 7-day block to set the switching times for
time switch program 2.
The heating program thus set becomes active with automatic mode
Setting range
1-7
1...7
• This setting must be made before the switching times are entered!
• For every day on which other switching times shall apply, preselection of the
individual day with subsequent entry of the switching times must be repeated
This setting is used to select either the whole week (1-7) or individual days (1...7).
Entry:
1-7 7-day block:
Entry of switching times on lines 13 through 18 is identical for every day from
Monday through Sunday.
1...7 Individual days:
Entry of switching times on lines 13 through 18 is made only for the individual
day selected here.
For an example, refer to the graph in the previous section "Time switch program 1".
Basic Documentation RVA63.242, RVA53.242
Description of end-user settings
Unit
7-day block
Individual days
.
51/218
CE1P2373E
26.03.2001