Crosspoint Area - Panasonic AV-HS450N Operating Instructions Manual

2. Functions in each area

Crosspoint area

2-1-1.

KEY
CKEY
KEY
AUX


PGM/A
1

PST/B
 PGM/A bus crosspoint buttons [PGM/A 1 to 32]
These are used to select the PGM/A bus video signals.
Buttons 1 to 32 can be selected using the [SHIFT] button.
 Refer to "3-1-2. Selecting the bus using the SHIFT function".
In the case of the flip-flop system, the main line video (PGM) signals are always selected.
When one of the crosspoint buttons (  ,  ,  ) is held down, the name of the input material and the number of
the crosspoint button are displayed.
 PST/B bus crosspoint buttons [PST/B 1 to 32]
These are used to select the PST/B bus video signals.
Buttons 1 to 32 can be selected using the [SHIFT] button.
 Refer to "3-1-2. Selecting the bus using the SHIFT function".
In the case of the flip-flop system, the images inserted next (PST) are always selected.
 AUX bus selector buttons [KEY, PinP 1/2, DSK 1/2, AUX1 to AUX4]
Select the bus to be operated using the AUX bus crosspoint buttons (  ).
The selected button lights.
[KEY]:
This button is used to change the AUX bus crosspoint buttons (  ) into the selector buttons for the sources
of the key fill buses.
The source for the key source bus can be set using the menu displayed when the AUX bus crosspoint
buttons (  ) are held down. The set source will be the same for DSK1 and DSK2.
The source can also be set from the CONFIG menu.
[PinP 1/2]:
This button is used to change the AUX bus crosspoint buttons (  ) into the selector buttons for the sources
of the PinP buses.
Each time it is pressed, its target is switched between PinP1 and PinP2.
When PinP1 is selected, the button lights in amber; when PinP2 is selected, it lights in green.
[DSK 1/2]:
This button is used to change the AUX bus crosspoint buttons (  ) into the selector buttons for the sources
of the DSK fill buses.
Each time it is pressed, its target is switched between DSK1 and DSK2.
When DSK1 is selected, the button lights in amber; when DSK2 is selected, it lights in green.
[AUX1] - [AUX4]:
These buttons are used to change the AUX bus crosspoint buttons (  ) into the selector buttons for the
sources of the AUX buses.
The AUX bus selector buttons are also used as the menu function buttons (  ).
PinP1 DSK1 TIME
BKGD
PinP2 DSK2 CBGD
PinP 1/2 DSK 1/2 AUX1 AUX2
AMBER:1 / GREEN :2
MENU FUNCTION / AUX BUS DELEGATION
2 3 4 5
/17 /18 /19 /20 /21
IMAGE A FMEM CTL XPT IN
IMAGE B SDCard CAM MV OUT
AUX3 AUX4
6 7 8 9 10
/22 /23 /24 /25 /26
20
1 2 3
CONFIG
SYS
4 5 6
USER
11 12 13 14 15
/27 /28 /29 /30 /31
CAM
MEM
SHIFT
SHIFT
16
/32
SHIFT