Selecting The Transition Mode; Manual Transition (Using The Fader Lever); Auto Transition; Cut Transition - Panasonic AV-HS450N Operating Instructions Manual

3. Basic operations

3-1-4. Selecting the transition mode

Press the [BKGD] button in the transition area so that its indicator lights in amber.
When the [BKGD] button and [KEY] button are pressed at the same time, both buttons are selected.
Use the [MIX] and [WIPE] buttons in the transition area to select the background transition mode.
The indicator of the selected button lights in amber.

3-1-5. Manual transition (using the fader lever)

Operate the fader lever to execute transitions manually.
If the fader lever has been operated during auto transition, auto transition will be switched to manual operation as
soon as the fader position overtakes the amount of the transition being executed.
The bus tally LEDs on the left of the fader lever indicate the program bus output status.
Top LED only lights:
Top and bottom LEDs light: during the transition
Bottom LED only lights:

3-1-6. Auto transition

 When the [AUTO] button is pressed, the transition is executed automatically using the transition time which has
been set.
 When the [AUTO] button is pressed while the fader lever is at an interim setting, the transition is executed in the
time remaining from the interim setting.
 The auto transition time is set using the TIME menu.
 Press the [TIME] button to light its indicator, and display the TIME menu.
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to display the BKGD sub menu.
 Turn [F4] to select the display unit using the Unit item.
 When frames (Frame) have been selected as the unit, turn [F3] to set the transition time.
 When seconds (Sec) have been selected as the unit, turn [F2] to set the second units or [F3] to set the
frame units.
<Menu display>
1 | TransTime
TIME
BKGD | 16s|
1 | TransTime
TIME
BKGD |
 Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs
depending on the video format.
59.94i: max. 33s09f, 59.94p: max. 16s39f, 50i: max. 39s24f, 50p: max. 19s49f,
24psf: max 41s15f, 23.98psf: max 41s15f

3-1-7. Cut transition

When the [CUT] button is pressed, the transition is executed instantly.
PGM/A bus output
PST/B output
| Unit |
39f| Sec|
| Unit |
999f| Frame|
37