Aux1 Transitions - Panasonic AV-HS450N Operating Instructions Manual

3. Basic operations

3-9-2. AUX1 transitions

The MIX transition is executed when the output signal set for AUX1 is switched.
 Press the [AUX1] button of the AUX bus selector buttons.
The selected button and its corresponding AUX bus crosspoint button light in amber.
 Press the AUX bus crosspoint button for the output signal to be switched to.
The MIX transition is now initiated for the length of the transition time that was set using the TIME menu.
While the transition is underway, the transition source AUX button lights in green, and the transition
destination AUX button blinks in amber.
As soon as the transition is completed, the transition source AUX button goes off, and the transition
destination AUX button lights in amber.
Furthermore, when another signal is selected at a midway point through a transition, the transition
processing continues from that midway point.
KEY PinP1 DSK1
CKEY PinP2 DSK2
KEY PinP 1/2 DSK 1/2
AMBER:1 / GREEN :2
AUX
Blinks in amber (while the transition is underway).
Lights in green.
TIME IMAGE A FMEM
BKGD
CBGD IMAGE B SDCard
AUX1 AUX2 AUX3 AUX4
MENU FUNCTION / AUX BUS DELEGATION
CTL XPT IN CONFIG
CAM MV OUT SYS
81
1 2 3
CAM
MEM
4 5 6
USER
SHIFT