3. Basic operations
3-2. IMAGE
3-2-1. Setting the IMAGE effects
Three effects — paint, mono-color, mosaic and defocus — can be set for the PGM/A bus materials and PST/B
bus materials.
Press the [IMAGE A] button (or the [IMAGE B] button) to light its indicator, and display the IMAGE A (or
IMAGE B) menu.
Refer to "2-1-5. LCD menu area".
Turn [F2], and set the IMAGE effect to On or Off.
To add the IMAGE effect, set to On.
<Menu display>
IMAG A 1 | On/Off |
IMAG A
|
Off|
Turn [F1] to display the menu (Paint, Mono, Mosa/Def sub menu) of the effect that is to be set.
<Menu display>
IMAG A 2 | On/Off | Y-Level | C-Level |
Paint
|
Off|
IMAG A 3 | On/Off | Hue
Mono
|
Off|
IMAG A 4 | On/Off | Mode
Mosa/Def|
Off|Mosaic |
Turn [F2], and set On or Off using the sub menu concerned.
Turn [F3] and [F4], and change the effect setting.
Executing the transition when the PGM/PST (flip-flop system) is selected in the BusMode item of the Operate
submenu of the CONFIG menu replaces the PGM/A bus with the PST/B bus, and the menu title "IMAG A" is
also replaced with "IMAG B".
|
|
On
0|
0|
On
0~7
0~7
| Sat
0.0|
0.0|
On
0.0
0.0
|
|
359.9
100.0
| Effect |
20.0|
On Defocus
0.0
|
100.0
|
|
|
38