Storing The Settings In The Memory (Store) - Panasonic AV-HS450N Operating Instructions Manual

3. Basic operations

3-10-2. Storing the settings in the memory (Store)

The settings for the images and operations to be kept in the memory can be stored in the number keys (1 to 10).
 Using the unit, set the images or operations to be kept in the memory.
 Press one of the buttons — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — to select the
corresponding memory whose settings are to be stored.
The selected button lights in amber.
Depending on the operation that was performed last, the [STOR] button, [RECALL] button or [DEL] button
lights.
 Press the [STOR] button.
The [STOR] button lights in red.
 Hold down (for about 2 seconds) the number key (1 to 10) in which the settings are to be stored. When the
storing on the settings in the held-down button is completed, the pressed number key lights in green (or in
amber with the AW system).
 Repeat the above steps to register other types of settings in other number keys.
 All the items of the selected type of the memory unit (SHOT memory, BKGD WIPE memory, PinP memory
and CAM memory) are stored in one number key.
 Refer to "3-10-1. Memory registration and recall items".
 The preset numbers stored in the pan-tilt heads are used for the [CAM MEM] button. The numbers stored
by the number keys in the memory area serve as the preset numbers of the pan-tilt heads.
 No settings can be stored in the number key that is lighted in green (or in amber with the AW system)
when the [STOR] button is pressed. First delete the memory settings in the number key, and then repeat
the storage procedure.
 Be careful when registering settings using the [CAM MEM] button, as preset numbers stored in the pan-tilt
heads are forcibly registered.
SHOT
1
STOR
MEM
1
BKGD
RE
WIPE
4
CALL
MEM
4
PinP
DEL
MEM 7
7
CAM
UNDO
10
MEM
10
MEMORY / PATTERN
85
PAGE
2 3
WIPE
2 3
SQ1 SQ2
5 6
SL1 SL2
3D1 3D2
5 6
BKGD
8 9 PATT
8 9
KEY
11 12
PATT
XPT DSBL EFF DSLV