Setting The Split Frame And Characters - Panasonic AV-HS450N Operating Instructions Manual

4. Input/output signal settings

4-8-2. Setting the split frame and characters

Set the frame, character brightness and background of the split screens to be displayed on the multi view display.
 Press the [MV] button to light its indicator and display the MV menu.
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to select the MV1 Frame or MV2 Frame sub menu depending on the multi view output signals to
be set.
<Menu display>
2 | Frame
MV
MV1Frame| LUM75%| LUM75%|
LUM 0%
LUM25%
LUM50%
LUM100%
Off
 Turn [F2] to set the split frame brightness and split frame display using the Frame item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these settings for the brightness of the split frame (gray scale).
Off: The split frame is not displayed.
 Turn [F3] to set the character brightness and character display using the Char item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these character (gray scale) brightness settings.
 The "!" mark appears in front of the name of the material when no signals are input or signals with
a different format are input.
 When signals amenable to camera control have been input, the "c" mark is displayed in front of
the name of the material.
 When the input signal is frozen, the "F" mark is displayed in front of the name of the material.
 When the "!" mark is displayed, the "c" mark will not be displayed.
 When the "F" mark is displayed, the "!" mark and the "c" mark are not displayed.
Off: The characters are not displayed. Neither is the character background shown.
 Turn [F4] to set whether the character background (half-tone) is to be displayed using the Label item.
On: The character background is displayed.
Off: The character background is not displayed.
| Char | Label | Tally
On|Red+GRN
LUM 0% Off
LUM25%
LUM50%
LUM100%
Off
4 | Frame
MV
MV2Frame| LUM75%| LUM75%|
Red LUM 0%
Off LUM25%
LUM50%
LUM100%
125
| Char | Label
On|Red+GRN
LUM 0% Off
LUM25%
LUM50%
LUM100%
Off Off
| Tally
Red
Off