Panasonic AV-HS450N Operating Instructions Manual page 15

1. Installation
 Align the option board with the guide rails, and insert it slowly.
Insert it until it will go no further. Take care not to exert excessive force while doing this since that may damage
the connector inside.
 Mount the option board in place using the two screws.
Clamping torque: 0.7 N•m
 After connecting the necessary cables, plug the power cord into the power outlet, and turn on the power.
I- D
D V
T S
P U
I IN
D V
I- D
D V
Screw
15
Screw