Setting The Down-Converter (Option) - Panasonic AV-HS450N Operating Instructions Manual

4. Input/output signal settings

4-5. Setting the down-converter (option)

Select the settings for the down-converter that is built into the SDI output board (option).
 Press the [OUTPUT] button to light its indicator
and display the OUTPUT menu.
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to display the OUTPUTYY sub menu.
(Y: Out1 to Out4, A1, A2, B1 or B2)
The output signal to be converted is selected for Y.
 Turn [F2] to display the third menu of DownConv.
 Turn [F3] to select the scaling system using the Scale item, and press the [F3] switch to enter the setting.
SQ (squeeze):
The top, bottom, left and right are reduced so that the aspect ratio is set to 4:3.
EC (edge crop):
The aspect ratio is maintained, the image is reduced in size in line with the vertical resolution, and it is
cropped at the left and right.
LB (letter box):
The aspect ratio is maintained, the image is reduced in size in line with the horizontal resolution, and a
black image is added at the top and bottom.
System image (HD)
 Turn [F4] to set the delay time of the output using the Delay item, and press the [F4] switch to enter the
setting.
90H (75H): When the system format is 1080/59.94i, the image is delayed from the system image (HD)
by 90H, and output.
When the system format is 720/59.94p, the image is delayed from the system image (HD) by
90H+1F (frame), and output.
When the system format is 1080/50i, the image is delayed from the system image (HD) by
75H, and output.
When the system format is 720/50p, the image is delayed from the system image (HD) by
75H+1F (frame), and output.
When the system format is 1080/50i or 720/50p, "75H" is displayed on the menu.
1F: The image is output in-phase with a delay of 1 frame from the system image (HD).
For details on the phase and delay amounts, refer to "4-7. Adjusting the output signal phase".
 Turn [F5] to set the degree of sharpness of the edges for the image using the Sharp item, and press the [F5]
switch to enter the setting.
1: Standard up to 5: sharper edges
For details on the other settings, refer to the operating instructions of the optional board.
<Menu display>
OUTPUTYY | DownCnv | Scale↓ | Delay↓ | Sharp↓
Output image (SD)
SQ EC
117
| 2/2 |  SQ|
EC
LB
LB
 90H|  3
1F 1~5