3. Basic operations
3-1-3. Selecting the bus mode
Select the A/B bus system or flip-flop system (PGM/PST system) from the setting menu.
Press the [CONFIG] button to light its indicator, and display the CONFIG menu.
Refer to "2-1-5. LCD menu area".
Turn [F1] to display the Operate sub menu.
Turn [F2], and select the A/B or PGM/PST (flip-flop system) using the BusMode item.
<Menu display>
CONFIG 1 | BusMode | LCD-BL | MENUDLG |
Operate |PGM/PST|
A/B
With the flip-flop system (PGM/PST), the PGM/A bus selected signals are always output as PGM images, and the
PST/B bus selected signals are always output as PVW (PST) images.
System
A/B
With an A B transition
System
Flip-flop
PGM/PST
On|
On|
Off
Off
60
120
180
Video output
Before transition
PGM
PVW (PST)
PGM/A
1
/17
PST/B
Video output
Before transition
PGM
PVW (PST)
PGM/A
1
/17
PST/B
During transition
PGM/A
PGM/A, PST/B
PST/B
PST/B
2
1
2
/18
/17
/18
During transition
PGM/A
PGM/A, PST/B
PST/B
PST/B
2
1
2
/18
/17
/18
36
After transition completion
PST/B
PGM/A
1
2
/17
/18
Lighting in red
Lighting in green
After transition completion
PGM/A
PST/B
1
2
/17
/18
Lighting in red
Lighting in green