Camera Control - Panasonic AV-HS450N Operating Instructions Manual

5. System settings

Camera control

5-7-4.
A camera and pan-tilt head can be controlled from this unit.
Up to five cameras can be controlled via a controller (AW-RP655N or AW-RP555N) connected to the unit's COM
connector.
The unit can also be connected directly to a pan-tilt head, and the camera and pan-tilt head can be controlled.
To control a camera in this way, select "P/TCont" or "P/TDirt" as the Protcol item setting.
Be absolutely sure that the power of the equipment is turned off before proceeding to connect the cables.
Functions that can be controlled from the unit
 Switching of the cameras to be controlled in line with the selection of the crosspoint buttons (PGM/A 1 to 32 and
PST/B 1 to 32).
 The camera and pan-tilt head's pan-tilt operations and zooming and focusing operations are controlled.
 The operations for the setting menus of the camera are performed.
 When the unit is connected directly to a pan-tilt head, the red tally signal and power on/off are controlled from
the COM connector.
144