Table of Contents
Advertisement
2. Functions in each area
2-1-3. User button area
User buttons [USER1 to USER6]
These are used to assign some functions of the menu settings to the [USER1]
to [USER6] buttons on the CONFIG menu.
See "5-3-1. Setting the user buttons".
2-1-4. Transition area
[BKGD] button
This executes the background transition when the [AUTO] button ( ) or fader lever ( ) has been operated.
When the [BKGD] button is pressed and it is selected, its indicator lights in amber.
If the [KEY] button ( ) is now pressed, the indicator goes off, and the de-selected status is established.
When the [BKGD] button and [KEY] button ( ) are pressed at the same time, both buttons are set to the
selected status.
[KEY] button
This executes the key transition when the [AUTO] button ( ) or fader lever ( ) has been operated.
When the [KEY] button is pressed and it is selected, its indicator lights in amber.
If the [BKGD] button ( ) is now pressed, the indicator goes off, and the de-selected status is established.
When the [BKGD] button ( ) and [KEY] button are pressed at the same time, both buttons are set to the
selected status.
KEY ON tally LED
This lights in red when the key ON status is established.
MIX, WIPE selection status tally LEDs
These light up to indicate whether MIX or WIPE has been selected when background transitions or key
transitions are executed.
UNDO
10
10
XPT DSBL EFF DSLV
MEMORY / PATTERN
MIX
WIPE
BKGD
KEY
MIX
WIPE
CUT
AUTO
8
9
KEY
N/R
11
12
PATT
WIPE DIRECTION
KEY
ON
ON
PinP1
ON
DSK1
ON
22
R
FTB
ON
PinP2
ON
DSK2
ON
1
2
3
4
5
6
USER
- Quick Links:
- Configuration
Hide quick links:
Advertisement
Table of Contents
