Trimming Settings - Panasonic AV-HS450N Operating Instructions Manual

3. Basic operations

3-5-8. Trimming settings

 Press the [PinP1] button (or [PinP2] button) to light its indicator and display the PinP1 menu (or PinP2
menu).
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to display the Trim sub menu.
<Menu display>
6 | Trim
PinP1
Trim | Off|
Manual
4:3
 Turn [F2] to select the trimming type using the Trim item.
Off: No trimming
4:3: Automatic trimming so that the aspect ratio is 4:3
Manual: Trimming using the value set on the TrimAdj sub menu
 Turn [F3] to select the operation to be performed during the manual setting using the Manual item.
Free: The Left, Right, Top and Bottom parameters change independently.
However, the Left setting cannot exceed the Right setting (and vice versa) and, similarly, the Top
setting cannot exceed the Bottom setting (and vice versa).
Pair: The settings are changed in such a way that the Left and Right trimming amounts and the Top and
Bottom trimming amount are the same. (This makes for a top-bottom and left-right symmetry.)
 Turn [F1] to display the TrimAdj sub menu, and turn [F2], [F3], [F4] and [F5] to set the trimming values.
Operation
F2 Left
F3 Top
F4 Bottom
F5 Right
<Trimming settings> (figure shows the default values)
TOP (40)
BOTTOM (-40)
| Manual |
Free|
Pair
Parameter Description of setting
Trimming value at left
Trimming value at top
Trimming value at bottom
Trimming value at right
50
0
-50
-50 0
(-40)
LEFT
|
|
Area trimmed
Area where PinP is effective
Original size of PinP
50
(40)
RIGHT
70
Setting range
−50.00 to 50.00
−50.00 to 50.00
−50.00 to 50.00
−50.00 to 50.00
Initial value
−40.00
40.00
−40.00
40.00