Inserting The Bobbin - VERITAS 9000A5 Operating Instructions Manual

Commissioning
A
B
B
A

Inserting the bobbin

Caution:
− To avoid accidents when the machine is accidentally started, switch off the sewing machine (set main
power switch to «O») before inserting or removing the bobbin
Inserting the bobbin
– Remove the bobbin cover
– Insert the bobbin in the bobbin case with the thread running in an anti-clockwise direction (arrow)
– Pull the thread through the slit (A)
– Pull the thread toward the left and along the inside of the spring until it slips into the notch (B) being
sure that the thread does not slip out of the slit (A).
– Pull out about 15 cm (6 inches) of thread and slide on the bobbin cover (C)
C
Veritas 9000A5
12