Bringing Up The Bobbin Thread; Cutting The Thread - VERITAS 9000A5 Operating Instructions Manual

Commissioning

Bringing up the bobbin thread

Cutting the thread

Bringing up the bobbin thread
1. Lift the presser foot using the presser foot lift
Hold the upper thread with the left hand. Turn the handwheel toward you (anti-clockwise) lowering,
then raising the needle.
2. Gently pull on the upper thread to bring the bobbin thread up through the needle plate hole.
The bobbin thread will come up in a loop.
3. Pull both threads approx. 10 cm to the back under the presser foot.
Cutting the thread
Raise the presser foot. Remove the fabric, draw the threads to the left side of the face cover
and cut using the thread cutter. The threads are cut at the proper length to start the next seam.
Veritas 9000A5
16