Using The Threader - VERITAS 9000A5 Operating Instructions Manual

Commissioning

Using the threader

Note:
– To avoid accidents when the machine is accidentally started, switch off the sewing machine
(set main power switch to «O») before threading
Using the threader
Raise the needle to its highest position and lower the presser foot using the presser foot lift.
1. Lower the needle threader lever slowly and draw the thread through the thread guide as illustrated
and then to the right.
2. The needle threader automatically turns to the threading position and the tiny hook passes
through the needle eye.
3. Take the thread in front of the needle
4. Hold the thread loosely and release the lever slowly. The hook will turn and pull the thread
through the needle eye forming a loop. Pull the rest of the thread through the needle eye.
Veritas 9000A5
14