Buttonhole Stitching - VERITAS 9000A5 Operating Instructions Manual

Veritas 9000A5
Sewing
33

Buttonhole stitching

17: For thin or medium fabric
18: For horizontal buttonholes on blouses or shirts made from thin
19: For thin or medium fabric
20: For horizontal buttonholes on blouses or shirts made from thin
21: For horizontal buttonholes on heavy fabric
22: For thin or medium fabric
23: For suits, overcoats or jackets
24: For thick coats
25: For denim or trousers
26: For denim or stretch fabric with a coarse weave
27: For elastic fabrics
Note:
– Before sewing a buttonhole on your project, practice on a scrap piece
of the same type of fabric.
1. Mark the positions of the buttonhole on the fabric. The maximum automatic
2. Attach the buttonhole foot, then pull out the button holder plate and insert
3. Select the buttonhole stitch. Set the stitch width and stitch length (depending
Starting point
or medium fabric
or medium fabric
buttonhole length is 3 cm (1 3/16 inch). (Total of diameter + thickness
of button = buttonhole length).
the button. The size of the buttonhole is determined by the button inserted
in the button plate.
on the required width and density). The thread should be passed through the
hole in the presser foot, then be placed under the foot