Needle Stop Top/Bottom; Auto-Lock Button; Reverse Key - VERITAS 9000A5 Operating Instructions Manual

Veritas 9000A5
Commissioning / operating elements
9
Needle stop up/down

Auto-lock button

Reverse
Needle stop up/down
With the needle stop up/down function, the user can decide whether the needle should remain up or down
(still in the fabric) when the machines stops. Press the
upwards and the needle therefore remains at the top when the machine is stopped. If the arrow points
down ,the needle remains in the fabric when the machine is stopped.
The -key cannot be activated during sewing.
Auto-lock button
At the end of sewing, 3 locking stitches are always performed before the automatic stopping if the function
«Auto-Lock» is activated (press the
When using the stitch patterns 01 – 05, 3 locking stitches are performed (the display will show
this time).
In the case of the stitch patterns 06 – 16 and 30 – 60,
pressed. The machine then sews 3 locking stitches when the foot control is pressed.
When the -key is pressed again, the function is switched off again (the display goes off).

Reverse key

(only for stitch patterns 01 – 16 and 30 – 60)
In the case of the stitch patterns 01 – 16 and 30 – 60, keeping the reverse key
sewing can be performed backwards. Once the key is released again, the sewing machine will sew
forwards again. On the LCD screen, arrow
key so that arrow on the LCD screen points
-key).
appears in the display after the
indicates that the machine is sewing backwards.
during
-key is
pressed means that