Connect Vent; Level Dryer - Kenmore w10680149B Installation Instruction

CONNECT VENT
Using a 4" (102 ram) clamp, connect vent to exhaust outlet
in dryer, if connecting to existing vent, make sure vent Js
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood with
a 4" (102 mm) clamp.
LEVEL DRYER
q -
. Level Dryer
Place
level here
Place
level here
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing
system to operate correctly.
Not Level LEVEL Not Level
Move dryer to final location. Avoid crushing or kinking vent.
2. Adjust leveling legs
if dryer is not level, prop up using a wood block. Use wrench
to adjust legs up or down, and check again for levelness.
2O