Table of Contents
Advertisement
Available languages
Available languages
5. Remove the door strike plug with a fiat-head
screwdriver.
Remove door strike by pinching
the clips from the inside
door panel
and then rotate and push out the front. Insert
door strike on the other
side of dryer
door
by pushing
in
and then add the door strike plug.
6. Remove the door hinges and set off to the side.
7. Remove the 3 screws down the left and right
sides
of the door to remove the outer trim pieces.
\
/
\
/
0
0
0
0
8,
Lift door up and rotate trim pieces to the opposite
side they
were removed
from. Then screw trim pieces
back in.
\
/
\
9. Add the hinges to the right
side of the door and then flip
the hinge labeled
1 to the bottom
of the right side and the
hinge labeled
2 to the top of the right side of the door.
Page 24
Advertisement
Chapters
Table of Contents
