Kenmore w10680149B Installation Instruction page 23

Remove the door assembly
1. Lay the door on a fiat, covered surface, with the inside of
the door facing up. Remove the 3 plugs with a fiat-head
screwdriver. There is a cut out to stick the screwdriver under
to pop out.
3. Remove the inner door by taking a plastic putty knife to
separate the sides and bottom of the dryer door and trim.
There are 2 snaps on left, right, and bottom of door. Insert
the putty knife next to the snaps.
2. Remove the 10 screws from the dryer door and set
screws off to the side.
4. When you have the door separated from the frame use a putty
knife and lift up in the center tab and then pull door towards
you and out.
23