To Save Or Recall Traces - HP 54600B User, Installation And Service Manual

To save or recall traces

The oscilloscope has two pixel memories for storing waveforms. The
following exercise guides you through how to store and recall waveforms
from pixel memories.
Connect a signal to the oscilloscope and obtain a stable display.
1
Press .
2
Trace
A softkey menu appears with five softkey selections. Four of the softkeys are
trace memory functions.
Trace Selects memory 1 or memory 2.
Trace Mem Turns on or off the selected memory.
Save to Saves the waveform to the selected memory. The front-panel setup
is saved to a separate memory location.
Clear Erases the selected memory.
Recall Setup Recalls the front-panel setup that was saved with the waveform.
Toggle the softkey to select memory 1 or memory 2.
3 Trace
Press the Save to softkey.
4
The current display is copied to the selected memory.
Turn on the
5 Trace Mem
The trace is copied from the selected trace memory and is displayed in half
bright video.
softkey to view the stored waveform.
Operating Your Oscilloscope
To save or recall traces
2–31