Fine Mode - HP 54710A User's Reference Manual

Front-Panel Features

Fine Mode

Fine Mode

The fine mode allows you to change the channel scale, offset, and time base
scale in smaller increments using the knob than the knob normally allows.
For example, on most plug-ins the knob changes the channel scale in a 1-2-5
sequence, like 100 mV, 200 mV, and 500 mV. In the fine mode, the knob
changes the channel scale in smaller increments, like 100 mV, 101 mV,
102 mV.
To put the oscilloscope in the fine mode, press the blue key on the keypad,
then press the down arrow key with the word "Fine" written above it. Repeat
the process to exit the fine mode.
You can tell when the fine mode is active because the screen displays the
word "FINE" at the top-right corner of the graticule area.
2–8