HP 54710A User's Reference Manual page 4

Accessories Supplied
The following accessories are supplied with the oscilloscope.
•
•
•
•
The Service Guide for available power cords.
See Also
Accessories Available
The following accessories are available for use with the oscilloscope.
Make sure you use the correct length screw to rackmount the oscilloscope.
C A U T I O N
If you use a screw that is too short, it may not hold the oscilloscope safely in
the rack. If you use a screw that is too long, it can damage the oscilloscope.
•
•
•
•
•
•
•
•
•
•
•
This User's Reference
One Programmer's Reference
One Service Guide
One 2.3 meter (7.5 feet) power cord
HP 54710-68703 (Opt 907) Rackmount kit, handles only. Includes
M4 X 0.7 X 12 mm flat-head screws, HP part number 0515-2227
HP 54710-68704 (Opt 908) Rackmount kit, ears only. Includes M4
X 0.7 X 14 mm flat-head screws, HP part number 0515-0435
HP 54710-68705 (Opt 909) Rackmount kit with ears and handles.
Includes M4 X 0.7 X 20 mm flat-head screws, HP part number
0515-0456
HP 54720-68701 (Opt 002) Training kit including a PC board,
training guide, and power supply
HP 10087A HP 54710A to HP 54720A upgrade service
HP 54701A 2.5-GHz active probe
HP 54006A 6-GHz passive probe
HP 10430A 500-MHz 6.5-pF passive probe
HP 10441A 500-MHz 9-pF passive probe
HP 1141A 200-MHz differential probe
HP 1142A Power supply for HP 1141A Probe
iii