Channel Menu Display - HP 54710A User's Reference Manual

Channel Menu
Display
Display
Display turns the channel display off and on. When the channel display is on,
a waveform is displayed for that channel, unless the offset is adjusted so that
the waveform is clipped off the display. Also, the channel number, vertical
scaling, and offset are displayed at the bottom left of the waveform area.
They stay displayed until the channel is turned off, or until an automatic
measurement is performed. The automatic measurement results share the
same area of the display as the channel setups.
When the channel display is off, the waveform display for that channel is
turned off. Also, acquisition on that channel is stopped, unless it is needed as
an operand for waveform math functions, and any pulse parameter
measurements are stopped.
Even though the channel display is off, you can still use the plug-in as a
trigger source, as a function source in the math menu, or adjust the plug-in's
parameters. However, the oscilloscope will not acquire data unless one or
more of the other channel displays are turned on, or unless a math function is
using one of the channels.
6–4