Display Menu
Draw Waveform
Draw Waveform
The Draw waveform softkey determines how the data is displayed. There are
three choices for drawing waveforms: fast, connected dots, and high
resolution.
Fast
Fast plots the data points on the display as fast as possible, which gives this
mode the fastest throughput. If oscilloscope speed is what you need, use the
fast mode.
In the equivalent-time sampling mode, you may find that fast is your
preferred choice because of the high sample rate and display persistence of
the oscilloscope.
When the waveform record length is less than 1000 points, the throughput of
the oscilloscope is fast enough that you can use the other display modes
without noticing much decrease in throughput.
9–6