Measurements
The System Calculates Min and Max From the Data Record
The System Calculates Min and Max From the Data
Record
As it represents the full resolution of the signal, the absolute maximum and
minimum voltage levels are determined from the data record. If the
waveform is clipped, this information is also recorded. After the minimum
and maximum measurements are complete, the Vmin, Vmax, Vp-p, Tmin,
Tmax, and Tvolt measurements can be made. The remaining primitives of
the measurement process (calculate thresholds, find edge, and period) are
executed only if other measurements, such as fall time, frequency, or delta
time, are requested.
13–6