HP 54710A User's Reference Manual page 381

Mask Menu
Fail Action
Printer Printer sends the image copy of the waveform area to the
destination determined by the Store screen menu. The destination can
be one of several printers. The printer selection gives you a hardcopy of
what the screen looked like at the time of the failure.
Disk Disk stores a image copy of the waveform area to a disk. The
description for "Disk" under "Store summary" in this chapter applies
except that the file extension depends on the selected print format. For
example, the ThinkJet selection has a .PCL extension and the TIFF
selection has a .TIF extension.
Store waveforms
Store waveforms sends a copy of a channel, function, or memory to the
selected destination of off, memory, or disk. Waveform is not an image copy
of the waveform area. A stored waveform contains the vertical and horizontal
scaling factors which allows you to bring the waveform back into the
oscilloscope for measurement or rescaling.
Waveforms are stored on a source-by-source basis. For example, you can
store channel 1 to a file and channel 2 to a memory.
Off Off means that the waveform data is not stored, printed, or retained.
Memory Memory stores a copy of what the Source softkey is set to, to
one of the four waveform memories; the same waveform memories that
are accessed by the Waveform menu.
Because a waveform memory can contain only one waveform at a time, a
waveform memory is best used when you are looking for one failure. You can
send either the waveform that failed or another waveform to the waveform
memory.
Disk Disk stores a copy of the waveform to a disk. The description for
"Disk" under "Store summary" in this chapter applies.
See also Chapter 20, "Waveform menu," for additional details on waveform memories.
23–24