HP 54710A User's Reference Manual page 258

If you need to create a file name, press the file name softkey. Then, the
softkey menu shown at the left is displayed. With this menu you can create a
file name with the letters and numbers from the character list. You can use
any of the characters from the character list, and in any order or
combination. The file name cannot exceed eight characters.
•
To move the cursor through the character list, use the knob.
•
To select a character from the character list, use the enter key on the
keypad.
•
To enter numbers into the file name, use the keypad or select numbers
from the character list.
•
To move the cursor through the file name, use the arrow keys.
•
To erase the entire file name, press the clear (Clr) key on the keypad.
•
To move the cursor one character to the left in the file name and to also
delete that character, use the Backspace softkey.
•
To delete a character from the file name, use the arrow key to position the
cursor over that character, then press the Delete softkey.
You do not need to add a file extension in to the file name because the
oscilloscope automatically assigns a file extension depending the type of file
you selected. The file extensions are listed below:
•
.TIF for TIFF and color TIFF files
•
.PCX for PCX files
•
.PCL for PaintJet, ThinkJet, DeskJet, and LaserJet print files
•
.EPN for Epson print files.
•
.GIF for GIF files
Setup Print Menu
Destination
15–7