Destination - HP 54710A User's Reference Manual

Setup Print Menu

Destination

Destination

Destination allows you to select where the data is sent. If the destination
device is not connected to the oscilloscope, the screen displays the message
"Print canceled: Printer is not responding."
Centronics
Centronics prints to the parallel port on the rear panel of the oscilloscope.
HP-IB
HP-IB prints to the HP-IB connector on the rear panel of the oscilloscope.
When HP-IB is selected, an additional softkey is available that allows you to
specify an HP-IB address for the printer.
Disk
Disk prints to the disk drive in the oscilloscope. When disk is selected, an
additional softkey is displayed that specifies the file name. If that file already
exists on the disk, you are prompted to press the continue key before the file
on the disk is overwritten. You can either press the continue key to overwrite
the file, or you can press the To file softkey and enter a new file name.
To see a directory listing of the files on a disk
1 Press the Disk hardkey.
2 Select directory.
The oscilloscope automatically checks for any files on the disk, then it displays
a listing of any files that are already on the disk.
15–6