Display Menu
Label
Label
The label softkey allows you to annotate waveforms with text. You can place
up to 16 labels on the display, and each label can contain up to 64 characters.
You can then print the display with the labels to a printer.
Remember, labels are not a part of the waveform. If you save the waveform
to a waveform memory or to a disk, the screen labels are not saved with the
waveform. However, labels are saved when you save front-panel setups with
the Setup menu to a setup memory or to a disk.
For positioning the first character of the label, the waveform viewing area is
divided into 19 vertical rows (0-18) and 64 horizontal columns (0-63). Label
position 0,0 is the upper left hand corner and position 18,63 is the lower right
hand corner.
Display
The display softkey allows you to turn the labels off and on.
Define new label
The Define new label softkey allows you to add a new label to the waveform
viewing area. When you press the Define new label softkey, a second-level
softkey menu comes up on the display. This second-level menu allows you to
position the label and enter the text for the new label.
9–13