Scan - Icom IC-F4062S Sales Handbook

Display Text
Enter up to a 12 or 24-character* text to indicate
message, etc. during scanning and indicating the scan
group.
* Depending on the Display Lines setting in Key &
Display Assign.
Right click to display the [Edit... Enter] menu and click
[Edit... Enter].
Double click the desired character in the table or push
[Space] to pick up the character.
Push [Enter] to finish editing.
Usable characters are listed below.

Scan

- You can use and make an original character that is
edited in the Character Editor Screen.
Edit the original character
Up to 16 original characters or symbols can be
edited/created in this sheet for a variety of information
indication.
Select the text indication capability from OFF, Text or
Start CH during scan.
OFF
Text
text that is programmed in Display Text as above is
indicated during scan.
Start CH: The text indication is turned ON. The scan start
channel's text is indicated during scan.
Turn the power save function ON and OFF during scan.
Total scanning speed is decreased when the function is
activated.
Text
: The text indication is turned OFF.
: The text indication is turned ON. The channel's
PWR Save
36