Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Icom IC-F4062S
Summary of Contents for Icom IC-F4062S
- Page 1 F3062 Series F3062 Series Sales Handbook Sales Handbook Count on us...
- Page 2 The systems and applications described herein are for information and reference purposes only. Handbook Revisions Icom reserves the right to make changes to the content of this handbook at any time without notice or obligation. IPR and Copyrights The Icom products described in this handbook may include Icom Intellectual Property Rights (IPR) and/or copyrighted Icom computer programs stored in radio memories or other media/devices.
-
Page 3: Table Of Contents
Table Of Contents Table Of Contents 1 Introduction 1-1 Company Profile 2 Over View 2-1Product Line Up 2-2 Common Features· 2-3 Key Features of BIIS 1200 Signalling 2-5 Key Features of 6.25kHz Digital 2-6 Function and Specifications Comparison 2-7 Supplied Accessories Attachments 2-8 Optional Accessories 12-14 2-8-1 Battery Charging and Battery Case... -
Page 4: Introduction
Company Profile Icom, the wireless communication experts Icom Inc. is a company located in Osaka, Japan, and is a manufacturer of wireless communication products. Since Icom’s establishment in 1954, we have had a long record as a trusted manufacturer of land mobile radio, amateur radio, marine radio, navigation products, aviation radio and communications receivers. -
Page 5: Overview
Overview Product Line Up VHF Handheld Transceivers UHF Handheld Transceivers T Series S Series (10-Keypad Version) (Simple Keypad Version) Dimensions Supplied Accessories (May differ according to version)... -
Page 6: Common Features
The supplied 2000mAh Li-Ion battery pack, BP-232, F3062 series shows upper and lower case characters provides 14 hours* of operating time. Icom’s rugged clearly. The display setting is selectable from 1 line, 12 dual-rail guide securely locks the battery to the radio. -
Page 7: Common Features
2: Protected against solid objects up to 12 mm in field diameter 3: Protected against solid objects up to 2.5 mm in Icom makes rugged products diameter that have been tested to and 4: Protected against solid objects up to 1 mm in... -
Page 8: Key Features Of Biis 1200 Signalling
Key Features Compatible with conventional radios The BIIS radios are fully compatible with the Digital ANI conventional version of other Icom models. Conventional channels and BIIS channels are programmable in the same radio and can be I know who is selected on site. -
Page 9: Key Features Of 6.25Khz Digital
•lower cost for business and industry customers Multi-site IP Networks •compatible with existing FM radio hardware Icom’s has implemented this technology in the F3062 series. To enable backwards compatibility, the radio is both analog and digital and also works in 25 kHz and 12.5 kHz channel bandwidths (conventional and LTR™... -
Page 10: Function And Specifications Comparison
Function and Specifications Comparison... -
Page 11: Supplied Accessories Attachments
Supplied Accessory Attachments Attach the supplied accessories as shown below. Flexible antenna Connect the supplied flexible antenna to the antenna connector. CAUTION! • NEVER HOLD by the antenna when carrying the transceiver. • Transmitting without an antenna may damage the transceiver. Battery pack To attach the battery pack: Slide the battery pack in the direction of the arrow (①), then... -
Page 12: Optional Accessories
Optional Accessories for Handheld Transceivers Current options available are shown below. Ask your Icom distributor for further details if required. (*Not available for all countries.) BATTERY PACKS and CASE ▲ BP-230N ▲ BP-232N ▲ BP-240 Li-Ion 7.4V/ 980mAh Li-Ion 7.4V/ 2000mAh AAA(LR03) batteries×6... - Page 13 Optional Accessories for Handheld Transceivers BELT CLIPS LEATHER BELT HANGERS MB-94 : Alligator type MB-93 : Swivel type MB-96N : Swivel type. MB-96F : Fixed type Same as supplied. MB-93 swivel joints supplied HEADSETS and PTT/VOX UNIT HS-94 : Earhook headset HS-95 : Behind-the-head HS-97 : Throat VS-1SC : PTT/VOX unit.
-
Page 14: Optional Accessories
Optional Accessories for Handheld Transceivers ANTENNAS CUT ANTENNAS STUBBY ANTENNAS FA-SC25V : 136–150MHz, Blue FA-SC61VC : 136–174MHz, White FA-SC56VS : 150–162MHz, Red FA-SC55V : 150–174MHz, Red FA-SC61UC : 380–520MHz, White FA-SC57VS : 160–174MHz, Green FA-SC25U : 400–430MHz, Green FA-SC73US : 450–490MHz, Red FA-SC57U : 430–470MHz, Red FA-SC72U : 470–520MHz, Blue *INTERNAL UNITS... - Page 15 2-8-1 Battery Charging The charging instructions below are shown here for your reference. Using the optional battery chargers AD-106 installation Rapid charging with the BC-160 a.Install the AD-106 desktop charger adapter into the The optional BC-160 provides rapid charging of optional holder space of the BC-119N/BC-121N.
-
Page 16: Battery Charging And Battery Case
•Never expose a detached battery case to water. If the DANGER Charge the specified Icom batteries only. Only battery case gets wet, be sure to wipe it dry before using tested and approved for use with genuine Icom batteries. -
Page 17: Optional Swivel Belt Clip
2-8-2 Optional Swivel Belt Clip SWIVEL BELT CLIP MB-93 contents To detach Qty. a.Turn the transceiver upside down in the direction of a.Belt clip……………………………………………………… 1 the arrow and pull out from the belt clip. b.Base clip …………………………………………………… 1 To attach a.Release the battery pack if it is attached. -
Page 18: Optional Vs-1Sc Vox/Ptt Case
• VOX Delay The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 The VS-1SC is a VOX/PTT unit for Icom handheld sec. step) for a convenient interval before returning to transceivers, and allows you hands-free operation. -
Page 19: Optional Internal Unit
CAUTION! Optional unit installation should be done at authorized • The PC board modification for UT -109R and UT-110R Icom service centre only. installation The water-resistance capability of the transceiver cannot Cut the pattern on the PC board at "MIC" and "AFOUT" as be guaranteed if you install an unit yourself, or have it shown below.. -
Page 20: Operation And Function
Operation and Function Operation and Function Note: Operation of the functions described below may depend on radio programming. ANTENNA CONNECTOR DEALER-PROGRAMMABLE Connects the supplied KEY [Side1] antenna. Desired functions can be programmed by your dealer. DEALER-PROGRAMMABLE KEY [Emer] Desired functions can be programmed by your dealer. -
Page 21: Function Display
3-1-1 Function Display SIGNAL STRENGTH INDICATOR ALPHANUMERIC DISPLAY Indicates relative signal strength level. ➥ Displays an operating channel number, channel name, Set mode contents, DTMF LOW POWER INDICATOR code, etc. Appears when low output power is selected. ➥ The indication mode can be selected from 1 AUDIBLE INDICATOR line or 2 lines. -
Page 22: Functions Programmable To Keys
[CH Up] or [CH Down] to select the programmable function keys. desired group. Consult your Icom dealer or system operator for details SCAN ADD/DEL (TAG) KEY “SCAD” concerning your transceivers programming. Push to add or delete the selected channel to/from the If the programmable function names are bracketed in scan group. - Page 23 Functions Programmable to Keys HIGH/LOW KEY “H/L” • The emergency call is transmitted one time only or Push to select the transmit output power temporarily or repeatedly until receiving a control code depending permanently, depending on the pre-setting. on the pre-setting. •...
-
Page 24: Functions Programmable To Keys
Functions Programmable to Keys USER SET MODE KEY “SET” Setting example for BIIS operation ➥Push and hold to enter user set mode. The following functions are assigned to each • During user set mode, push this key to select an item, programmable key for display example. -
Page 25: Special Functions
3-1-3 Special Functions CPU revision indication Operation The revision number of the CPU can be indicated on the ① Push [P0] several times to select the appropriate LCD. It is convenient when confirming the CPU item. Then, push [Side2] or [Side3] to set the desired revision level/condition. -
Page 26: Cloning Software Cs-F3060
• e.g. the serial number on the CD is 000001, enter icon appears on the desktop screen. “289701-000001” as the ID number. Note 1: Icom distributes cloning software by CD or license. Depending on this, some information here may not apply as written, e.g. ID number. ®... - Page 27 Basic Setup of Cloning Software Connections All cloning operations are performed from the computer’s keyboard— the operation required on the transceiver side is; 1.First, connect the cloning cable as illustrated below. 2.While pushing and holding [P0], rotate [VOL] to turn power ON. Screen description 1.
-
Page 28: Basic Setup Of Cloning Software
Basic Setup of Cloning Software Programming information • We recommend that you should read out all the transceiver’s data before start entering/editing parameters even if the transceiver is factory fresh. This avoids rare glitches which might cause programming errors when writing back the altered parameters. -
Page 29: Cloning Items For Conventional Mode
3-2-2 Cloning Items for Conventional Mode Cloning items Continuous Tone The Memory CH, MSK, LTR™, Digital, DTMF, Continuous Set the continuous tone frequency. The programmed Tone, SCAN, 2-Tone, 5-Tone and Common items allow continuous tone is used for encoder and/or decoder. you to set the transceiver customized. -
Page 30: 2-Tone (Lmr) Signalling
ICOM radios allow variable tone periods and spaces channel. This feature is also known as “Radio (no tone) between the tones. -
Page 31: 5-Tone (Pmr) Signalling
Where to activate 5-Tone a tone. Enable the radio in PMR mode by selecting the PMR *** Re-emphasize: ICOM strongly recommends that Model in the Model section of the cloning software. programmers do NOT alter any data in the Format... - Page 32 1. 5-Tone allows the PTT ID functionality on the radio. •5-Tone is a non-proprietary signalling protocol that 2. As with 2-Tone, PMR also provides audible alerts, allows the Icom radio to inter-operate with other brands emergency signalling and Dispatch functionality using the 5-Tone signalling.
-
Page 33: Scan
Scan What is Scanning? Mode 1 (Normal): The ability of a radio user to listen to radio traffic on other channels without having to manually switch from one channel to another SCAN LIST A total of 11 scanning lists ([1] to [9], [0] and [Z]) are available for wide variety and flexible scanning operation. - Page 34 Scan Priority scan. "Priority A" is selected channel in CH Atr in Priority scan. The priority channel is selected by the Memory CH screen is used for the priority channel. rotary selector. The scanning sequence is the same as Mode 2 (Prio-A) The scanning sequence is the same as Mode 2 (R.Sel) above.
- Page 35 Scan Mode 2 (Prio-A,B): Scan Receives Signal Stop Scan During Scan Priority scan. The priority A and B channels are Is Scan Mode Is Scan Mode selected in CH Atr in Memory CH screen. a Mode 1? a Mode 3? The checked channels are scanned in sequence while monitoring the priority A and B channels.
-
Page 36: Scan
Scan Display Text - You can use and make an original character that is edited in the Character Editor Screen. Enter up to a 12 or 24-character* text to indicate message, etc. during scanning and indicating the scan group. * Depending on the Display Lines setting in Key & Display Assign. -
Page 37: Voice Scrambling System
Voice Scrambling Systems Voice scrambling methods The built-in inversion type voice scrambler provides secure conversation. When a more secure system is required, the 32 code non-rolling-type voice scrambler UT-109R and 1020 code rolling type UT-110R are available as an option. Built-in inversion type voice scrambler This is the scrambling system which is built-in inversion type voice scrambler inverts the high and low audio frequencies. - Page 38 Voice Scrambling Systems Common - Scrambler Program setting for scrambler • Type Set installed voice scrambler type as UT-110R Rolling or UT-109R Non-rolling. As Rolling type and Non-rolling type have different code settings, they are not compatible. By selecting Non-rolling type in this item, you can use the UT-109R, or UT-110R as Non-rolling type.
- Page 39 Icom (UK) Ltd. Sea Street, Herne Bay, Kent CT6 8LD Telephone: +44 (0) 1227 741741. Fax: +44 (0) 1227 741742. URL: www.icomuk.co.uk/ e-mail: info@icomuk.co.uk. Count on us!
Need help?
Do you have a question about the IC-F4062S and is the answer not in the manual?
Questions and answers