Basic Setup Of Cloning Software - Icom IC-F4062S Sales Handbook

Ic-f3062 series vhf and uhf handheld transceivers

Hide thumbs Also See for IC-F4062S:

Instruction manual (48 pages)

Instruction manual (48 pages)

Table Of Contents

Table of Contents

Programming information

• We recommend that you should read out all the transceiver's data before start entering/editing parameters even if

the transceiver is factory fresh. This avoids rare glitches which might cause programming errors when writing back the

altered parameters.

•CS-F3060 has 5 model types. You can select the desired model type which you are going to clone. LMR (2Tone), LMR

(LTR™), LMR (Digital), PMR (5Tone/DTMF) or BIIS PMR is available. The Tree View screen content will be changed when

the model type is switched.

LMR

• Select the model type which you are going to clone from; LMR (2Tone), LMR (LTR™), LMR (Digital), PMR (5Tone/

DTMF) and BIIS PMR.

LMR

: Land Mobile Radio. 2-Tone, LTR™ and Digital functions are available.

PMR

: Private Mobile Radio. 5-Tone and DTMF function is available.

BIIS PMR : Binary Interchange of Information and Signalling. MSK and 5-Tone functions are available.

NOTE:

The model type must be selected at first, otherwise the edited contents will be lost.

• Double-click the desired cell in the contents list screen directory, or right-click the cell then click [Edit... Enter] to

select and change the setting depends on the item.

• Click [Help] to display the help screen for the item.

Frequency RX

Enter specified receive frequency in RX box.

VHF (IC-F3060 series)

UHF (IC-F4060 series)

450 to 512/520 MHz (depending on version)‫‏‬

Help screen