Icom IC-F4062S Sales Handbook page 27

Connections
All cloning operations are performed from the computer's keyboard— the operation required on the transceiver side is;
1.First, connect the cloning cable as illustrated below.
2.While pushing and holding [P0], rotate [VOL] to turn power ON.
Screen description
1. FILE MENU [File]
Used for saving memory channel contents, printing
the pre-programmed information or exiting the
program, etc.
2. VIEW MENU [View]
•Selects the displayed font size.
•Turn the tool bar ON or OFF.
3. COM PORT MENU [COM Port]
•Click to display the COM port (1 to 4 and More)
setting dialogue box.
•Set the transfer speed (Normal or High).
NOTE: 'Check the following' dialogue box appears
when the COM port is not set correctly.
4. CLONING MENU [Clone]
Click to display the cloning menu and cloning
information dialogue box.
Basic Setup of Cloning Software
1. MODEL MENU [Model]
Select the appropriate model type which you are
going to clone.
2. HELP MENU [Help]
Click to display the help contents and cloning
software revision information.
3. TOOL BAR
Shortcut buttons appear on the tool bar when the
tool bar indication is turned ON in the [View] menu.
4. TREE VIEW SCREEN
Click the folder icon which you want to edit.
5. CONTENTS LIST SCREEN
Display the contents list (Memory CH information,
Common settings, etc.).
27