Common Features - Icom IC-F4062S Sales Handbook

Ic-f3062 series vhf and uhf handheld transceivers
Hide thumbs Also See for IC-F4062S:
Table of Contents

Advertisement

2-2
MULTI-MODE, MULTI-FEATURED BIG AUDIO RADIO
Designed and built for advanced communication needs, the IC-F3062 series handhelds satisfy
your demands with a host of features such as built-in multiple signalings, LTR capability and
large dot-matrix display. The IC-F3062 series provides loud and clear audio even in noisy
environments. Below are some of the common features of this series.
Lithium-Ion battery pack
The supplied 2000mAh Li-Ion battery pack, BP-232,
provides 14 hours* of operating time. Icom's rugged
dual-rail guide securely locks the battery to the radio.
The optional battery case BP-240 provides a convenient
back up and great reassurance in an emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on
Most popular signals built-in
The IC-F3062 series has built-in 2-Tone, 5-Tone, CTCSS
and DTCS signaling capabilities as standard for group
communication or selective calling. Also, the IC-F3062
series can decode ten 2-Tone codes or eight 5-Tone
codes on a channel. When a matched tone is received,
the following actions are programmable for each code.
• Beep sound
• Bell icon
• Answer back call
Wide frequency range and large channel capacity
The IC-F3062 series covers a wide frequency range in
one version (VHF 136–174 MHz, UHF 400 – 470MHz).
The 512 memory channel capacity with 128 zones
allows you to divide and store a variety of flexible
channel groupings. Wide, middle and narrow channel
bandwidth (25/20/12.5kHz) is also programmable.
Voting mode scanning
The Voting mode scanning detects the S-meter level of
repeater stations and automatically selects the
strongest station, useful for roaming between 2 or more
repeater sites. In addition, the IC-F3062 series has 10
scanning modes including priority scan and double
priority scan.
Enhanced audio
The IC-F3062 series employs a BTL amplifier that
increases the audio output and the built-in audio
compander provides clear, low noise communications.

Common Features

• Auto TX
• Stun/kill radio • Scan
Full dot-matrix LCD
Using a large full dot-matrix LCD (32 × 18 mm), the IC-
F3062 series shows upper and lower case characters
clearly. The display setting is selectable from 1 line, 12
characters or 2 lines 24 characters via programming.
The bottom row shows assigned functions to the [P0] to
[P3] buttons.
Built-in inversion-type voice scrambler
The built-in inversion type voice scrambler provides
secure conversation as standard. When a more secure
system is required, the 32 code non-rolling-type voice
scrambler UT-109R and 1020 code rolling type UT-110R
are available as an option.
Other features
•Built-in basic trunking capability.
•8 DTMF autodial memories
•2 step reduced power setting
•Power on password
•Busy, repeater lockout functions
•Radio stun and kill functions disable a lost or stolen
unit over the air
•Surveillance function temporarily turns off the LED
backlight and beep sound
•Powerful 5W output both VHF and UHF
•Flash CPU for future upgrade and more...
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-f4062tIc-f3062tIc-f3062s

Table of Contents