Icom IC-F4062S Sales Handbook page 35

Mode 2 (Prio-A,B):
Priority scan. The priority A and B channels are
selected in CH Atr in Memory CH screen.
The checked channels are scanned in sequence while
monitoring the priority A and B channels.
-The priority A channel is selected automatically when
scan is cancelled during scanning.
-TX via [PTT] is performed in the priority A channel.
-When scan is cancelled while a signal is receiving, the
channel the signal is received on is selected
automatically.
-TX via [PTT] is performed in the channel that received
the signal.
Mode 3 (Prio-A,B):
Priority scan. The priority A and B channels are
selected in CH Atr in Memory CH screen. The scanning
sequence is the same as Mode 2 (Prio-A, B) above.
-The priority A channel is selected automatically when
scan is cancelled.
-TX via [PTT] is performed in the priority A channel.
NOTE:
-"Mode 2 (R.Sel)" and "Mode 3 (R.Sel)" can be
available only for Portable mode and when "MR CH" is
selected in Rotary Selector in Key & Display screen.
-The scanning channels are selected in Scan List in
Memory CH screen.
Scan
Yes
received becomes
the current channel
Wait Resume Time
Resume Scanning
Scan
Stop Scan
Is Scan Mode
a Mode 1?
No
Last channel Prio-A/Rotary Sel.
channel becomes
the current channel
Did you
NO
Transmit?
No
Period
Is Scan Mode
Yes
R.SelA?
No
Current channel Rotary selector
becomes the channel becomes
priority channel the priority channel
Receives Signal
During Scan
Is Scan Mode
a Mode 3?
No
Yes
Received channel
becomes the
current channel
YES
Transmit message
by PTT on last
channel received
Is Start/Stop
Mode a
ScanA?
Yes
Is Scan Mode
Yes
R.SelA?
No
Cancel Scanning
35