Icom IC-F4062S Sales Handbook page 15

2-8-1
The charging instructions below are shown here for your reference.
Using the optional battery chargers
Rapid charging with the BC-160
The optional BC-160 provides rapid charging of optional
Li-Ion battery packs.
• An AC adapter (may be supplied with BC-160
depending on version) or the DC power cable (OPC-
515L/CP-17L) is additionally required.
AC adapter (Not supplied
with some versions.)‫‏‬
Optional OPC-515L
(for 13.8 V power
source) or CP-17L
(for 12 V cigarette
lighter socket) can
be used instead of
the AC adapter.
Rapid charging with the BC-119N+AD-106
The optional BC-119N provides rapid charging of battery
packs. The following items are additionally required.
• AD-106 charger adapter
• An AC adapter (may be supplied with BC-119N
depending on version) or the DC power cable (OPC-
515L/CP-17L).
BATTERY
AC adapter
PACK
(Not supplied with
some versions.)‫‏‬
Optional OPC-515L (for 13.8
V power source) or CP-17L
(for 12 V cigarette lighter
socket) can be used instead
of the AC adapter.
Battery Charging
TRANSCEIVER
BATTERY
PACK
TRANSCEIVER
AD-106 charger
adapter is installed
in BC-119N.
AD-106 installation
a.Install the AD-106 desktop charger adapter into the
holder space of the BC-119N/BC-121N.
b.Connect the plugs of the BC-119N/BC-121N to the AD-
106 desktop charger adapter with the connector, then
install the adapter into the charger with the supplied
screws.
AD-106
Plugs
Rapid charging with the BC-121N+AD-106
The optional BC-121N allows up to 6 battery packs to be
charged simultaneously. The following items are
additionally required.
• Six AD-106 charger adapters
• An AC adapter (BC-157) or the DC power cable (OPC-
656)‫‏‬
BATTERY
PACK
AC adapter
(Purchased
Separately)‫‏‬
DC power cable (OPC-656)‫‏‬
(Connect with the DC power supply;
13.8 V/at least 7 A)‫‏‬
Connectors
Screws
supplied with
the charger
adapter
TRANSCEIVER
AD-106 charger
adapters are
installed
in each slot.
15