Playing The Scene You Have Found - Sony PDW-850 Operation Manual

THUMBNAIL/ESSENCE MARK
button with the SHIFT button held
down.
The Select Essence Mark screen appears.
The names of essence marks that are not
recorded on the disc are displayed in gray.
Shot Mark1
Shot Mark2
Rec Start
Cut
Others
If planning metadata with user-defined
essence mark has been loaded
You can select user-defined essence marks
(see page 136).
2
Select the essence mark that you want,
and then press the SET/S.SEL button or
the MENU knob.
The essence mark thumbnail screen (see
page 110) displays a list of frames where the
selected essence mark is set.
To switch directly to the Rec Start essence mark
thumbnail screen
Before starting, set FIND MODE in the
ESSENCE MARK page of the MAINTENANCE
menu to "R.ST".
When the Rec Start essence mark thumbnail
screen is displayed, each press of the
THUMBNAIL/ESSENCE MARK button
switches between that screen and the clip
playback screen (Resume function). This setting
allows you to use the THUMBNAIL/ESSENCE
MARK button as a shortcut to Rec Start essence
mark thumbnail screen, which is convenient for
checking start points in clip recorded with the
Clip Continuous Rec function.
To return to the clip thumbnail screen from the
Rec Start essence mark thumbnail screen, press
the RESET/RETURN button.
118 Thumbnail Operations
Select Essence Mark
In the clip playback screen, the PREV and NEXT
buttons jump to the previous or next recording
start points.

Playing the scene you have found

After finding a clip with one of the methods
explained in the previous section, "Searching
with thumbnails" (page 116), you can cue up and
play the clip that you have found.
To search for a thumbnail position and
cue it up
See page 114 for more information about GUI screen
operations.
1
Select the thumbnail that you want to
cue up.
Clip:C0010
OK
TC 00:23:00:25 TC 00:23:40:07
TC 00:25:49:23 TC 00:26:22:10
TC 00:28:06:09 TC 00:28:22:02
30 NOV 2005 13:40
DATE&TIME
2
Press the SET/S.SEL button or the
MENU knob.
To play clips with the SET/S.SEL button
In the Disc Menu, set Settings >SET Key on
Thumbnail to "Cue up & Play". Play begins from
the selected frame when you press the SET/S.SEL
button, in the same way as when you press the
PLAY/PAUSE button.
To search for a thumbnail position and
play from there
See page 114 for more information about GUI screen
operations.
1
Select the thumbnail that you want to
play.
010/041
TC 00:24:45:11 TC 00:25:06:14
TC 00:27:19:04 TC 00:27:51:09
TC 00:23:34:18 TC 00:23:54:22
0:00:04:14
DUR