Sony PDW-850 Operation Manual page 183

No. Page Item
18 GENLOCK GENLOCK
GL HD H PHASE
GL SD H PHASE
(Does not appear
when the FORMAT
page item SYSTEM
LINE is set to 1080
and the SYSTEM
FREQUENCY item
is set to 23.9P)
REFERENCE
19 ND COMP ND OFFSET
ADJUST
CLEAR ND
OFFSET
20 AUTO AUTO BLK
SHADING SHADING
RESET BLK SHD
TEST OUT
SELECT
MASTER
GAIN(TMP)
21 APR APR
APR(SLS)
APR PRESET
Settings Description
OFF/ON Turns genlock on and off.
(–99 to 99) Sets the HD output H phase for genlock
operation.
(–99 to 99) Sets the SD output H phase for genlock
operation.
INTERNAL/ Displays the type of reference signal used by
GENLOCK/ this unit.
SDI IN
OFF/ON Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
EXEC Clears ND filter color compensation values.
EXEC Executes the auto black shading correction
function.
If executed when in SLS (slow-speed shutter)
mode, this performs only fine compensation
on edge portions of the screen.
EXEC Clear black shading compensation values.
VBS/Y/R/G/B Selects the signal output of the TEST OUT
connector.
–6dB/–3dB/0dB/ Temporarily sets the master gain value.
3dB/6dB/9dB/
12dB/18dB/
24dB/30dB/
36dB/42dB
EXEC Suppresses white flecks by executing the
automatic pixel noise reduction function.
EXEC Suppresses white flecks in SLS (Slow Speed
Shutter) mode by executing the automatic
pixel noise reduction function.
Note
The execution time for this function is about 30
minutes. More time may be required when
temperatures inside the unit are low.
EXEC Deletes white flecks data that was added by
execution of the APR and automatic black
balance adjustment functions.
h)
Menu List 183