Sony PDW-850 Operation Manual page 62

1
Display the SHT ENABLE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" (page 193).
025 SHT ENABLE
SHUTTER ECS
SHUTTER SLS
SHUTTER 1/100
SHUTTER 1/125
SHUTTER 1/250
SHUTTER 1/500
SHUTTER 1/1000
SHUTTER 1/2000
2
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
b on the left of the selected item changes to
z and z on the left of the setting changes to
?.
3
Turn the MENU knob until ON
appears, then press the MENU knob.
z on the left of the selected item changes to
b and ? on the left of the setting changes to
z.
To set another mode or speed, return to step
2.
Note that only the shutter speeds set to ON
can be selected with the SHUTTER selector.
4
To end the menu operation, set the
MENU ON/OFF switch to OFF or close
the cover of the menu operating section.
The menu disappears from the screen and the
display indicating the current status of the
camcorder appears along the top and bottom
of the screen.
To set the shutter speed in degree units
On the SHUTTER SELECT page of the
MAINTENANCE menu, you can specify degrees
(angle of opening of the shutter) to select the
shutter speed in standard shutter mode.
Note
When you enable degree settings, the unit disables all
items on the SHT ENABLE page of the OPERATION
menu except SHUTTER ECS and SHUTTER SLS.
62 Setting the Electronic Shutter
: ON
: OFF
: ON
: ON
: ON
: ON
: ON
: ON
1
Display the SHUTTER SELECT page
of the MAINTENANCE menu, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select SHUTTER SELECT, and turn
the MENU knob to display DEGREE.
M27 SHUTTER SELECT
SHUTTER SELECT
ADD: ---.-
DEL:
DEGREE
1: 216.0
2: 180.0
3: 90.0
4: 45.0
5: 22.5
6: 11.2
Six shutter speeds appear. A registered
shuttle angle appears in the DEGREE field of
each line. A shutter speed (exposure time, in
units of seconds) appears in the SECOND
field, as calculated by converting from the
selected frame rate.
Each time that you flick the SHUTTER
selector to the SELECT side, the setting or
mode changes in the following order. (SLS
mode and ECS mode appear only when they
are enabled on the SHT ENABLE page of the
OPERATION menu.)
Example of standard mode display
(shutter degrees setting)
1 2 3
SLS mode
To register user-defined settings
You can register up to six shutter angle settings.
If six settings are already registered, you must
delete one of the registered settings before
registering a new one.
1
Rotate the MENU knob to move the b
mark to the DEL position, and then
press the MENU knob.
The b mark changes into a z mark, and the
z mark changes into a ? mark.
Also, a * mark appears before the number.
TOP
: DEGREE
SECOND
1/99.85
1/119.7
1/239.0
1/475.0
1/940.0
1/1880
4 5 6
ECS mode