Sony PDW-850 Operation Manual page 165

No. Page Item
09 DETAIL 2 KNEE APERTURE
KNEE APT LVL
DETAIL LIMIT
DTL WHT LMT
DTL BLK LMT
DTL V-BLK LMT
V DTL CREATION
H/V CONTROL MODE H/V /V
10 SD DETAIL SD DETAIL
SD DETAIL LEVEL
SD CRISPENING
SD DTL WHT LIMIT
SD DTL BLK LIMIT
SD LEVEL DEPEND
SD LV DEPEND LVL
SD DTL FREQUENCY (–99 to 99)
SD DTL H/V RATIO
SD CROSS COLOR
(When NTSC(J)AREA
or NTSC AREA is
selected on the
FORMAT page)
Settings Description
OFF/ON Turns the knee aperture function
on or off.
(–99 to 99) Sets the knee aperture level.
(–99 to 99) Sets the both detail black and
white limiters.
(–99 to 99) Sets the detail white limiter.
(–99 to 99) Sets the detail black limiter.
(–99 to 99) Sets the V detail black limiter.
NAM/G/R+G/Y Selects the source signal of the V
DTL signal.
Selects the operation mode of
DTL H/V RATIO on the
DETAIL 1 page.
H/V: H and V increase and
V: V DTL only enabled
OFF/ON Turns the SD detail correction on
or off.
(–99 to 99) Sets the general level of the SD
detail signal.
(–99 to 99) Sets the SD crispening level.
(–99 to 99) Sets the SD detail white limiter.
(–99 to 99) Sets the SD detail black limiter.
OFF/ON Turns the SD level depend
function on or off.
(–99 to 99) Sets the level of the SD level
depend.
Sets the frequency of the SD H
detail signal.
(–99 to 99) Sets the level of the SD V detail
signal.
(–99 to 99) Sets the SD cross color reduction
level.
decrease in inverse
proportion
Menu List 165