Sony PDW-850 Operation Manual page 40

4
Turn the MENU knob to display the
desired value, and press the MENU
knob.
b
z changes to
5
To continue the remaining settings,
repeat steps 3 and 4.
6
When you finish settings, turn the
MENU knob to move b to "OK", then
press the MENU knob.
The internal clock is set with the date and
time set in steps 3 to 5. The TIME/DATE
page of the DIAGNOSIS menu appears
again. The time set on the TIME ADJUST
setting window is displayed.
To cancel the setting
Before executing step 6, move b to "ESC" at the
top right of the window and press the MENU
knob.
Alternatively, flick the CANCEL/PRST/
ESCAPE switch down to the ESCAPE side.
All settings or changes are discarded and the
TIME/DATE page of the DIAGNOSIS menu
appears.
Note
When you set the time, also set TIME ZONE.
Set TIME ZONE on the UMID SET page of the
OPERATION menu. For details, see "Setting the
UMID data" (page 218).
Setting the Clock to GPS Time
You can set the camcorder clock using clocks on
GPS satellites.
Note
The following actions are required on the camcorder in
order to use this function.
• GPS must be set to ON on the GPS SETUP page of the
OPERATION menu.
• GPS positioning
1
Display the TIME/DATE page in the
DIAGNOSIS menu, and turn the
MENU knob until the b cursor is
pointing to GPS ADJUST.
40 Setting the Date/Time of the Internal Clock
and ? changes to z.
D02 TIME/DATE
ADJUST
GPS ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
2
Press the MENU knob.
The "EXECUTE OK?" message appears (the
b cursor is pointing to NO, which is
flashing).
3
Turn the MENU knob to select YES,
then press the MENU knob.
The camcorder clock is set to the time using
clocks on the GPS satellites.
TOP
: EXEC
: EXEC
: 12
: 55
: 58
: 14
: 03
: 31