Sony PDW-850 Operation Manual page 253

Alarm messages during thumbnail
search, scene selection, and clip list
operations
An alarm message may appear in the LCD
monitor during thumbnail search, scene selection,
and clip list operations. In that case, take the
action indicated in the following table.
Cannot The clip cannot be expanded into
Expand Clip more blocks. This alarm appears
any Further. when the DISP SEL/EXPAND
button is pressed when the number
of blocks is maximum, or when
the duration of an expanded
thumbnail is one frame.
Selected The selected essence mark does
Essence Mark not exist.
Does not This alarm appears in the essence
Exist. mark selection screen when the
specified essence mark does not
exist on the disc.
Sub Clip is The temporal relationship between
Invalid. Set the specified In and Out points in a
Appropriate TRIM operation (see page 130) is
IN/OUT not correct. Reset so that the value
Points. of the Out point timecode is larger
than the value of the In point
timecode.
Duration of The total duration of the current
One Clip List clip list exceeds the upper limit of
must be Less 24 hours as the result of an Add
than 24 Sub Clips (see page 128) or Trim
Hours. Sub Clip (see page 130) operation.
No More Sub The total number of the sub clips
Clips can be of the current clip list exceeds the
Added to the upper limit of 300 as the result of
Clip List. an Add Sub Clips (see page 128)
or Trim Sub Clip (see page 130)
operation.
Sub Clip does An attempt is made to execute a
not Exist. Move Sub Clips (see page 129),
Trim Sub Clip (see page 130),
Delete Sub Clips (see page 130),
or Set Start Time Code (see
page 131) operation with no sub
clips in the current clip list.
Clip List does An attempt is made to execute a
not Exist. Delete Clip List operation (see
page 132) when there are no clip
lists on the disc.
Move is An attempt is made to execute a
Invalid. Move Sub Clips operation (see
page 129) when there are no sub
clip in the current clip list, or when
there is only one.
Shot Mark An attempt is made to execute a
does not Delete Shot Mark (see page 117)
Exist. operation on a clip with no shot
marks recorded in.
Chapter does An attempt was made to display a
not Exist. nonexistent chapter.
Some Essence An attempt is made to delete an
Mark cannot essence mark that cannot be
be Deleted. deleted with a Delete Essence
Mark operation. Rec Start and Cut
essence marks cannot be deleted.
Some Essence An attempt is made to move an
Mark cannot essence mark that cannot be
be Moved. moved with a Move Essence Mark
operation. Rec Start and Cut
essence marks cannot be moved.
Command An attempt was made to execute
Disabled. the Format Disc command with
Setting Format Disc set to
"Disable".
Clip is An attempt is made to delete a
Locked. clip, set the clip thumbnail, or
delete a shot mark when the clip is
locked.
All Clips are An attempt is made to execute a
Locked. Lock All Clips operation when all
clips are already locked.
All Clips are An attempt is made to execute an
Unlocked. Unlock All Clips operation when
all clips are already unlocked.
A File with A file name that was specified in a
the Name you Set Clip Name operation already
Specified exists.
Already
Exists.
Specify a
Different
Name.
Set NAMING An attempt was made to rename a
FORM to clip with Set Clip Name when
"free" NAMING FORM is not set to
"FREE" (see page 94).
Operation Warnings 253