Sony PDW-850 Operation Manual page 93

The message "COMPLETE!" appears when
the transfer finishes.
Note
The message "FILE NOT FOUND!" appears if no
list of title prefixes is found.
Check the location where the file is stored on the
USB flash drive.
To select a prefix from the title prefix list
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the CLIP TITLE page of the
OPERATION menu.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select "SELECT PREFIX" and then
press the MENU knob.
A list of up to 20 title prefixes appears.
P00 TITLE PREFIX
001: Tennis
002: Basketball
003: Skiing_1
004: Skiing_2
005: Athletics
006: Aquatics
007: Cycling
008: Softball
009: Fencing
010: Sailing
Note
When no list of title prefixes has been transferred to
the internal memory of this unit, only the initial
value "TITLE" appears.
3
Select the desired title prefix from the
list, and then press the MENU knob.
The CLIP TITLE page appears again, and the
selected prefix appears in the PREFIX field.
To enter a title prefix directly
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the CLIP TITLE page on the
OPERATION menu.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select "PREFIX" and then press the
MENU knob.
A prefix string appears.
3
Move x onto the character you want to
change, and then press the MENU
knob.
4
Turn the MENU knob to move x onto
the desired character in the list of
selectable characters, and then press
the MENU knob.
5
Repeat steps 3 and 4 to enter the
remaining characters.
6
When you have finished entering the
ESC
prefix, turn the MENU knob to move x
to "END" and then press the MENU
knob.
The camcorder exits prefix input mode, and
the original CLIP TITLE page appears.
To set the initial value of the clip title
serial number
You can set the initial value of the clip title serial
number to 00001 (default) or to any 5-digit value.
To return the initial value to 00001
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the CLIP TITLE page on the
OPERATION menu.
For details on menu operations, see "Basic
menu operations" (page 193).
2
Select "CLEAR NUMERIC"and then
press the MENU knob.
The message "CLEAR OK? bYES NO"
appears.
3
Select "YES" and then press the MENU
knob.
The value in the NUMERIC field returns to
00001.
030 CLIP TITLE
TITLE :
SELECT PREFIX :
CLEAR NUMERIC :
LOAD PREFIX DATA:
PREFIX : TITLE
!#$%&'()+,-.0123456789;
=@ABCDEFGHIJKLMNOPQRSTUV
WXYZ[]^_abcdefghijklmnop
qrstuvwxyz{}~
INS DEL RET ESC END
Advanced Operations for Shooting
TOP
ENABL
EXEC
EXEC
EXEC
93