Playing The Scene You Have Found; Selecting The Information Displayed On Thumbnails - Sony PDW-700 Operation Manual

4
Select OK to delete the mark, or Cancel
to cancel the deletion, and then press the
SET/S.SEL button or the MENU knob.
To adjust the position of shot marks at chapter
positions
You can use the chapter thumbnail screen to
adjust the position of shot marks (Shot Mark1 and
Shot Mark2) at chapter positions. (The positions
of Rec Start essence marks cannot be adjusted.)
1
In the chapter thumbnail screen, select
the thumbnail of the shot mark whose
position you want to adjust.
2
Display the Thumbnail Menu.
3
Select Move Shot Mark.
The Move Shot Mark screen is displayed.
Move Shot Mark : ShotMark2
00:28:23:14
TCR
You can perform playback and searches in
this screen.
4
Use the PLAY/PAUSE button or F
REV/F FWD buttons to display the
frame you want.
You can also perform jog playback by
turning the MENU knob.
5
Select OK, and then press the SET/
S.SEL button or the MENU knob.
To display the chapter thumbnail screen of the
previous or next clip with chapters
With the chapter thumbnail screen still active,
press the PREV button or the NEXT button.
The unit searches in the reverse or forward
direction for the next clip with chapters,
beginning with the previous or next clip.
Using essence marks to find scenes
See page 90 for more information about thumbnail
screen operations.
1
In the clip playback screen or the clip
thumbnail screen, press the
THUMBNAIL/ESSENCE MARK
button with the SHIFT button held
down.
The Select Essence Mark screen appears.
The names of essence marks that are not
recorded on the disc are displayed in gray.
2
Select the essence mark that you want,
and then press the SET/S.SEL button or
the MENU knob.
The essence mark thumbnail screen (see
page 87) displays a list of frames where the
0002/0002
selected essence mark is set.

Playing the scene you have found

OK
After finding a clip with one of the methods
Cancel
explained in the previous section, "Searching
with thumbnails" (page 91), you can cue up and
play the clip that you have found.
• Press the SET/S.SEL button or the MENU knob
to cue up the position of the selected thumbnail.
• The PLAY/PAUSE button starts playback from
the selected frame.
To play clips with the SET/S.SEL button
In the Disc Menu, set Settings >SET Key on
Thumbnail to "Cue up & Play". Play begins from
the selected frame when you press the SET/S.SEL
button, in the same way as when you press the
PLAY/PAUSE button.
Selecting the information
displayed on thumbnails
You can select the information to be displayed at
the bottom of the thumbnails in thumbnail
screens.
See page 90 for more information about thumbnail
screen operations.
1
Display the Thumbnail Menu in the clip
thumbnail screen.
Select Essence Mark
Shot Mark1
Shot Mark2
Rec Start
Cut
Others
Thumbnail Operations 93