Sony PDW-850 Operation Manual page 252

Formatting! The disc is being automatically
formatted. Wait until the format
ends.
Recording The unit is writing to the file
system. Wait until writing
finishes.
No EM Space Essence marks cannot be inserted.
EM Full! For details, see "Recording
essence marks" (page 82).
Cache REC! An attempt was made to perform
an operation that cannot be
performed when the picture cache
function is enabled. The operation
will be ignored.
Disc Exchag! An attempt was made to perform
an operation that cannot be
performed when the disc exchange
cache function is enabled. The
operation will be ignored.
Live Logg! An attempt was made to perform
an operation that cannot be
performed when the Live Logging
function is set to Live View mode.
The operation will be ignored.
SB CLP mode An essence mark or clip flag
operation was attempted while the
SUB CLIP indicator was lit. Press
the SUB CLIP/DISC MENU
button to turn the indicator off and
try again.
No SEL List No clip list is selected. Create a
new clip list, or load a clip list
from the disc.
No List! There is no clip list. Create a clip
list.
No SUB Clip There are no sub clips in the clip
list. Register a sub clip, or load
another clip list.
SUB Clip NG The In and Out point positions are
invalid. Set correct In and Out
points.
MAX# SB The total number of sub clips is
CLP over the upper limit (300).
Resolution An attempt was made to register a
clip in a clip list with a different
resolution.
CL OVER The total duration of sub clips in
DUR the current clip list is over the
upper limit (24 hours).
252 Operation Warnings
FAN Stopped The main unit or drive fan has
DR-FAN Stop stopped. Avoid use under high
temperatures, turn off the power,
and contact a Sony service
representative.
NVRAM NG! An error was detected while
accessing internal memory. Power
the unit off and contact a Sony
service representative.
Update Err! A firmware update failed. Power
the unit off and contact a Sony
service representative.
Unknown An unsupported USB device was
USB connected to this unit.
NO USB A USB flash drive write operation
MEMORY! was attempted with no USB flash
drive connected.
USB A write inhibited USB flash drive
MEMORY was connected with MEMORY
INHIBIT! REC on the MEMORY REC page
USB M. INHI of the OPERATION menu set to
ENABL.
USB The connected USB flash drive
MEMORY was not usable when a USB flash
ERROR! drive write operation was
attempted.
M. Shortage A USB flash drive write operation
was attempted without enough
free memory in the USB flash
drive.
USB A USB flash drive write operation
MEMORY was attempted without free
FULL! memory in the USB flash drive.
MEM REC A USB flash drive write operation
NG! failed with MEMORY REC on the
MEMORY REC page of the
OPERATION menu set to
ENABL.
M. access! An attempt was made to switch
GUI screens during a USB flash
drive write operation.
ILL. TIME A clock error has occurred. Set the
date and time of the internal clock
again.