Assigning the functions to the ASSIGN buttons (Continued)
Reviewing the most recently
recorded scenes (Rec review)
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
This is convenient during playback of the
latest scene check.
Press the REC REVIEW button or the
ASSIGN button to which [REC
REVIEW] is assigned during
The last 2 seconds (approx.) of the most
recently recorded scenes will be played
back, then your camcorder returns to
Searching for the last scene of
the most recent recording
Assign [END SEARCH] to one of
the ASSIGN buttons (p. 48).
Press the ASSIGN button to
which [END SEARCH] is
The last scene of the most recent
recording will be played back for about
5 seconds, and the camcorder goes
standby at the point where the last
recording has finished.
• End search will not work once you eject the
• End search will not work correctly if a blank
section exists between recorded sections on the
Playing back the most recently
recorded movies (Last scene
You can set your camcorder to
automatically rewind the tape to the
beginning of the most recently recorded
scene, play back to the end of the scene,
then stop the tape.
Assign [LAST SCN RVW] to an
ASSIGN button (p. 48).
During standby, press the
ASSIGN button to which [LAST
SCN RVW] is assigned.
The last scene review starts.
• If the recording time of the movie is short,
[LAST SCN RVW] may not work correctly.
• If you press the ASSIGN button again during
the last scene review, your camcorder plays
back the last 5 seconds of the most recently
recorded movie, then goes standby at the end of